What You’ll Need:
- Your LYNX Touch 5100/5200/7000 panel.
- A stable Wi-Fi network.
- Wi-Fi credentials (Network Name/SSID and Password).
- A Wi-Fi communication module (L5100-WIFI) installed in the panel.
Note: If you don’t already have the Wi-Fi module installed, it must be inserted into the panel before continuing.
Step-by-Step Instructions to Configure Wi-Fi
Step 1: Access the Wi-Fi Settings
- On the LYNX Touch home screen, tap on the “Tools” icon.
- Enter your master code (default is often 1234 unless changed).
- Select “Wi-Fi Config” from the list of options.
Step 2: Scan for Available Networks
- Tap on “Scan Access Points” to search for available Wi-Fi networks.
- Wait for the system to display the list of networks.
- Select your Wi-Fi network (SSID) from the list.
Step 3: Enter Your Wi-Fi Password
- After selecting your network, a prompt will appear to enter the Wi-Fi password.
- Use the on-screen keypad to input your password.
- Tap “Done” once the password is entered correctly.
Step 4: Confirm Connection
- After entering the password, the panel will attempt to connect to the Wi-Fi network.
- Once connected, you will see a confirmation message like “Wi-Fi Connected” on the screen.
- The panel will display the Wi-Fi signal strength in the upper-right corner of the display.
Step 5: Test the Connection
- To verify connectivity, return to the Wi-Fi Config screen.
- Tap on “Test” to ensure the system communicates with your network successfully.
- If the test passes, you’re all set!
Troubleshooting Tips
If you encounter issues during setup, try these quick fixes:
- Verify Your Wi-Fi Credentials: Ensure the SSID and password are correct.
- Check Signal Strength: Weak Wi-Fi signals can cause connection issues. Move your panel closer to the router or use a Wi-Fi extender.
- Reboot the Panel: Turn the panel off and on to reset the connection attempt.
- Power Cycle Your Router: Restart your Wi-Fi router to clear any temporary issues.
If problems persist, contact Alberta Alarms for additional support.
Final Thoughts
Configuring Wi-Fi on your LYNX Touch 5100/5200/7000 is a straightforward process that unlocks a variety of advanced features for your security system. By following the steps above, you can ensure your panel remains connected and accessible, providing you with the convenience and peace of mind you deserve.
Need help? Contact us today for expert support, or explore our range of compatible security devices and monitoring services to take your system to the next level.
Stay connected, stay secure!
